3.6V Lithium Thionyl Chloride Battery factory

Forum Home Forums Business 3.6V Lithium Thionyl Chloride Battery factory

This topic contains 0 replies, has 1 voice, and was last updated by  astao84 2 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #99418 Reply

    astao84

    Er14250h Lithium Battery
    Specification for Er14250h Lithium Battery
    Nominal voltage: 3.6V
    Nominal capacity: 750mAh(1mA / 2.0V)
    Discharge end-voltage: 2.0V
    Max constant discharge current: 5mA
    Max. pulse current: 30mA
    Ambient temperature range: -55℃~ +85℃
    Storage life: ≥10 year, Yearly self-discharge ≤ 1%
    Appearance: Cylinder Shape
    Max dimension : φ10.2×45.0mm
    Max weight: 8
    Detail data
    ItemMeasuring ProcedureStandard
    AppearanceVisual checkClean, unscratched and clearly labeled
    DimenaionsMeasured by calipers with precision of 0.02mmMax.φ10.2×45.0mm
    WeightWeighed by balance with precision of 0.1gMax 8g
    Open-circuit voltageMeasure by volt-meter with precision of 0.01V≥3.65V
    Operating voltageMeasure by volt-meter with precision of 0.01V, connecting an impedance of 1200Ω in series, Reaching the target voltage in 5 seconds.≥3.30V
    ChargeProhibitedProhibited
    Over-dischargeProhibitedProhibited
    Self dischargeStore the batteries at constant temperature of 20±5℃, Measure the nominal capacity yearly for 10 years.≤1%

    Caution for Er14250h Lithium Battery
    Fire,explosion and severe burn hazard.
    Do not recharge,crush,disassemble heat above100℃,
    Incinerate, or expose contents to water .
    Do not solder directly to the cell

    3.6V Lithium Thionyl Chloride Battery factory
    website:http://www.sunlandpower.com/non-rechargeable-battery/3-6v-lithium-thionyl-chloride/


Viewing 1 post (of 1 total)
Reply To: 3.6V Lithium Thionyl Chloride Battery factory
Your information:




Comments are closed.